ARX SECURITY

The ARX Security HVM Fence is a natural progression from the basic fence with LPS1175 A1 to LPS1175 B3 to 3kN Crowd loaded versions all using the same main basic elements of the main panel, base panel and posts.The ARX HVM Fence is now the only temporary, surface mount high security fence system to hold the new ISO 22343 crash rating  (V/7200[N2A]/48/90:8.9/16.0).In this test, 15 bays were installed complete with a 650kg concrete block on every second bay and wire cables in just 50 minutes, the fence is modular and very easy to install and recover but offers a wide variety of versions enabling you to adapt the fence to changing threats and risk levels.  

The ARX High Security Perimeter Fence system is available in 2.4m and 3.6m heights with a wide selection of optional security enhancements such as post covers, fence toppers, overhead electric fence attachement and PIDS attachments. The fence is designed to be self balasted and surface mount meaning no ground breakage is requirted but if more stability is needed depending on the site risk assessment, then ballast is available. The fence is attack tested by BRE and holds LPS1175 A1 and B3 certificatin and has recently been assessed for a 3kN crowd loading as well as wind loading to various windspeeds depending on the instalatioon type.  

The ARX STOPPER!™ HVM Barrier is a pedestrian permeable surface mount, PAS68/IWA14 tested hostile vehicle mitigation barrier with NPSA VADS accreditation which is quick and easy to transport, install and recover allowing for a physical protective barrier to be used to protect assets and crowds from hostile vehicle incursions into a protected space.  The PAS68/IWA14 setup requires 7 ARX STOPPER!™ units to be installed in a chicane arrangement with 1.2m between barriers. Both rows of barriers are physically connected by steel ropes with an acces ramp covering the ropes allowing for crowds to pass through safely. The barriers are then covered with either a correx or PE moulded cover which can be used for marketing purposes if required.  Purpose designed stillages store all equipment for ease of storage and deployment.    

ARX Security Help Point

The ARX Security Vehicle Access Barrier is a surface mount temporary barrier availabel in various formats from self ballasted free standing units, concrete barrier attached units and concrete ballasted units and wirh varying widths available. 

Super smart crowd control fencing solution! 

The ARX Security Crowd Barrier is a 1.2m wide aluminium construction, folding barrier available as in straight, corner and gated versions compleet with rounded crowd bar and integral security step.   

Working with the award winning designers of the APS Intrusion detection systems, ARX Security is now able to offer the ultimate completely legal and non-lethal fence topper deterrant, the Electro-fence and the Flexiguard PIDS system which are both retro-fitable to the ARX Securioty fence in its temporary, surface mount state offering added robust protection against intrusion.  

The ARX Seciruty IKAFLOOR modular floor system offers an ideal, quick instalation subfloor system suitable for any and all sites offering a solid basefloor in all environments.  Each panel measures 50cm x 50cm and locks together tool free and is available in a variety of colour options. Storage stillages are available.